Vignola rail

We have an extensive Vignola rail range. We offer various S, ASCE and UCI rail profiles, such as the S7, S41 r, S49, UIC60 and the ASCE 85.

All our rails are produced according to European specifications. Our rails are available in different lengths and steel qualities.

Thanks to our fully equipped workshop and engineering department, we can also make the rails to measure for you. Processing options: sawing to size, drilling, milling, bending and preserving.

Specifications

RAIL SECTION MASS G (KG/M HEIGHT H (MM) FOOT B (MM) HEAD K (MM) WEB W (MM) NEUTRAL AXIS E (MM) ADMITTED WHEELLOAD (KN) FACTORY STOCK (M) STANDARD TENSIL STRENGHT (N/MM2)
S7 6,75 65 50 25 5 33,95 28 5/6 540
S10 10 70 58 32 6 35,12 45 6/8/10/12 540
S14 14 80 70 38 9 41,80 64 6/8/10/12 690/880/1080
S18 18,30 93 82 43 10 47,90 82 6/8/10/12 540
S20 19,80 100 82 44 10 51,80 86 6/8/10/12 690/880/1080
S24 24,43 115 90 53 10 58,52 125 6/8/10/12 690/880/1080
30E1/ S30 30,13 108 108 60,30 12,30 55,88 140 15/12 690/880/1080
33E1/ S33 33,47 134 105 58 11 67,33 150 15/12 690/880/1080
41E1/ S41 r=10mm 41,24 138 125 67 12 69,34 220 15/12 690/880/1080
40E1/ S41 r=14mm 40,95 138 125 67 12 69,80 210 15/12 690/880/1080
49E1/ S49 49,39 149 125 67 14 75,77 225 12/15/18 690/880/1080
54E3/ S54 54,54 154 125 67 16 79,12 245 12/15/18 690/880/1080
46E3/ NP46 46,66 142 120 73,72 14 71,70 265 15/12 690/880/1080
50E2/ EB 50T 49,97 151 140 72 15 80,20 280 15/12 690/880/1080
EB 63 62,95 151 140 72 30 82,55 320 15/12 690/880/1080
54E1/ UIC54 54,77 159 140 70 16 84,03 280 12/15/18 690/880/1080
60E1/ UIC60 60,21 172 150 72 16,50 91,10 295 12/15/18 690/880/1080
UIC54A 65,39 159 140 70 28 86,33 310 12/15/18 690/880/1080
UIC60A 61,11 142 150 72 28 76,56 320 12/15/18 690/880/1080
ASCE 60 30,03 107,95 107,95 60,33 12,30 55,88 140 12/15/18 690/880/1080
ASCE 85 42,20 131,76 131,76 65,09 14,29 68,88 190 15/12 690/880/1080

The admitted wheel load from the rail table is based on the steel grade of the rail, the applied rail system, the wheel diameter and standard service factor as defined in DIN 15070. When optimizing these factors the maximal wheel load can be raised by approximately 35%.

Steel grades

STEEL GRADE TENSILE STRENGTH RM MIN. (N/MM2) YIELD STRENGTH RE MIN. (N/MM2) ELONGATION (%) HARDNESS (HB)
70 690 355 12 200
80 780 390 10 230
90 880 440 8 260
70 Va 690 450 15 200
80 Va 780 490 12 230
90 Va 880 540 10 260
100 Cr-Va 980 590 8 290
110 Cr-Va 1080 640 7 320

Reference projects

Request a proposal

Do you need advice from one of our technical specialists or would you like to recieve an offer for our products or services?

Fill in this contact form and we will contact you as soon as possible.

Or call us on
+31 (0) 226 - 42 53 00.